SEON Trooper TR9 Guia do Utilizador descarregar pdf (Página 24)

Record Menu

Adjusts the normal recording speed (0.2 to 60 images/second). RECORD SPEED

Adjusts the recorded image quality/compression from standard

quality/highest compression (1) to highest quality/lowest

compression (6).

IMAGE QUALITY

Overwrites the oldest video data when both disk drives are full. REPEAT RECORD

Disable to stop recording when both disk drives are full.

RECORD AUDIO 1 & 2 Enables audio recording for each audio input channel

DELAY-ON TIME Adjusts the delay from the time the ignition switch is turned on until

the DVR turns on (0 seconds to 60 minutes). Delay-on time can be

used to ensure the DVR input voltage has time to stabilize or to

delay the start of recording until the first passenger is picked up.

DELAY-OFF TIME Adjusts the delay from the time the ignition switch is turned off

until the DVR turns off (0 seconds to 60 minutes).

Changes the recording speed when an alarm event occurs. ALARM RECORDING

Alarm events can be triggered by an alarm switch or by video

motion detection.

Adjusts the recording speed during an alarm event triggered by

an alarm switch (0.2 to 60 images/second)

ALARM RECORD SPEED

Adjusts the duration of an alarm event (5 seconds to non-stop) ALARM DURATION

PRE-ALARM RECORDING The DVR maintains a cyclical buffer of 300 images, recorded at

the alarm speed and quality. If this option is on, the 300 images

preceding an alarm event are recorded. In the case of a Power

Loss (PL) alarm, the images are always recorded, even if this

option is off.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

Sem comentários

SEON Trooper TR9 Guia do Utilizador Página 24